Double Buckle Leather Curb Strap #CU21
Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
Bled Double Buckle Curb Strap #CU30
Description: The Bled Double Buckle Curb Strap #CU30 is made of 1/2 inch latigo leather that has been bled (braided) in the center. The bled leather has more texture than a flat leather strap. The texture increases the feel of the curb. The buckles and wire loop keepers are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb has a lot of feel on a young horse without the advanced signal of a chain. It makes a very nice transition curb when you need just a bit more signal than a leather strap but don’t need the strong signal of a chain curb strap. This curb is not legal on a shanked bit in AQHA classes. It does make a great training curb.
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
Steel C Shank Bit with Silver #A4
Description: The bit has “Buster Welch” style 6 1/2 inch shanks made of high quality 4130 grade steel and overlayed with beautiful hand engraved nickel silver. Mouthpieces are available for every need (see pictures at left). All mouthpieces are 5 1/8 inch wide, are made of steel or steel and copper, have inlaid copper strips to promote salivation (except #42), and are made in the diameters listed in pictures and dropdown. The bit comes with the #BH51 3/8 inch Latigo Leather Bit Hobble as shown.
How it works: The angle of this shank allows time for the horse to respond to the reins being adjusted (pulled) before the mouthpiece contacts the sides of the mouth, tongue and roof of the mouth and the curb strap makes contact with the chin or vice-versa when the reins are released. This truly is a great little shank! Almost all horses respond to this shank with confidence and content. This is a favorite with professional horsemen.
Shown with mouthpiece 2B.
Shown on horse in addition to the #A4 Steel C Shank Bit is the #HU1 Bosalita 3/16 Inch, the #DMR3 Round 3/8 inch Nylon Mecate, the #HS53 Two Buckle Slide Ear Headstall With Rawhide, the #CCR1 Rawhide Romel Reins and the #BC2 Shaped Breast Collar, custom stamped.
Offset D Ring Snaffle Bit #19
Description: The D rings on this snaffle are made of 1/4 inch steel and are 2 1/4 inches in diameter. This Offset D Ring Snaffle Bit #19 is available with 4 mouthpieces, each 5 1/8th inches wide (see picture to the left). Mouthpieces 9, 16 and 52 have inlaid copper bars to promote salivation.
How it works: Because the D rings on this snaffle don’t slide and the area of contact on the mouth is wider than on a ring snaffle this bit gives a stronger, quicker signal than a ring snaffle. The contact on the face from the Ds also helps the horse bring the opposite side of his face through a turn. This is a great bit to ride your colts in.
#9: This steel 2 piece snaffle mouthpiece is 3/8” in diameter. This is a great tool for anyone who wants a quicker and more consistent response when a horse is asked to give his head.
#16: The 3/8” steel 3 piece dog bone is a very gentle mouthpiece and can really help a horse relax. The extra link in the middle of the bit helps to spread the pressure from the rein signal more evenly across the mouth than a 2 piece snaffle. The copper rings promote salivation and also give the horse something to roll with his tongue to help him relax.
#42: The 3/16th inch steel twisted wire is designed for the horse that has become resistant to the plain snaffle and needs a bit of extra signal on the corners of the mouth to respond correctly. This steel bit is especially built at this diameter to prevent it from pinching or grabbing the skin at the sides of the mouth.
#52: The 5/8th inch steel two piece mouthpiece is designed larger in diameter than the other mouthpieces. This will help the horse relax as the width allows a slower signal/action than the 3/8th inch mouthpiece when rein pressure is applied. This can also be a good mouthpiece for riders who have limited experience.
Although you should always check with show management, this snaffle with mouthpiece #9 or #52 is legal in AQHA & NRCHA snaffle bit classes.
Shown with mouthpiece #52
Short S Shank Bit #B2
Description: This Steel Short S Shank Bit #B2 is made from high strength 4130 steel. The shanks are 6 3/4 inches in length and overlaid with hand engraved nickel silver. This bit is available with your choice of 4 mouthpieces (see picture at left). All mouthpieces are 5 1/8 inches wide, 7/16th inch in diameter and have copper strips inlaid to promote salivation. The bit is NRCHA legal with either the #4B or #4F roller mouthpiece and comes with the #BH41 Latigo Bit Hobble (shown) when a roller mouthpiece is ordered.
How it works: Because the shanks have a slight “S” angle they allow the horse a short amount of time after reins are adjusted (pulled) to respond to the cue before the mouthpiece makes contact with the sides of mouth, tongue, and roof of the mouth, the headstall crown piece makes contact with the poll, and the curb strap makes contact with the chin. This is a mild solid shank bit that works well for many disciplines and on many horses.
Shown with the 4F mouthpiece w/roller.
Steel Buster Welch Shank Bit #B5
Description: This solid Steel Buster Welch Shank Bit #B5 with 7 1/2 inch shanks is a favorite among horsemen, especially cutters. This bit is made from high strength 4130 steel and the shanks are overlaid with hand engraved nickel silver. The steel mouthpiece is 5 1/8 inches wide, 7/16″ in diameter with a flat low port, and is inlaid with copper strips to promote salivation.
How it Works: The angle of the shanks make this a particularly easy bit for the horse to carry and gives the horse time to respond after the reins are adjusted (pulled) before the mouthpiece makes contact with the sides of mouth, tongue and roof of the mouth, and the headstall crown piece makes contact with the poll, and the curb strap makes contact with the chin. This is a great shank if you require a little more response than you are getting with a shorter C style shank.