Browband Headstall with Rawhide & Black Ring Knots #HS63
Description: The Browband Headstall with Rawhide & Black Ring Knots #HS63 is made of doubled and stitched 5/8 inch race track harness leather lined with oil-tanned lining leather. It’s accented with beautiful hand braided rawhide with black ring knots on the cheek pieces and browband. The beveled stainless steel buckles have braided rawhide keepers. The leather beneath the buckles is hand sewn together to keep the buckles from slipping during adjustments. This leather is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The rawhide is treated with rawhide cream.
How it works: Race track harness is a very dense, fine grained leather which makes this headstall strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. Because the leather is split to the correct thickness before being doubled and stitched this headstall is not thicker than a single ply leather headstall. This makes it more durable and longer lasting than a single ply headstall and it has that good feel in your hands and on the horse. The impeccable braiding is done by a master of rawhide braiding.
This is a beautiful piece for work or show and is stunning on your snaffle bit colt! This headstall looks real good with the the #BC5 Straight Breast Collar with Rawhide or the #BC7 Full Rawhide Braided Breast Collar and with the #CCR1 Rawhide Romel Reins..
Available with your choice of slot concho, concho or tie string bit ends (see dropdown).
Shown with slot conchos.
Bridle with 3/8″ Snaffle & XX Reins #HT3
The Bridle w/ 3/8″ Snaffle & XX Reins #HT3 is made up of the:
• Headstall: 3/4 inch Browband Headstall #HS25. This headstall is made of heavy single ply harness leather, 3/4 inches wide. The leather has been hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The browband is doubled and stitched. The throatlatch is made of 5/8 inch single ply leather. All the buckles are beveled stainless steel with leather loop keepers. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping which makes this headstall so easy to adjust between horses. This bridle is available in 2 headstall sizes (see dropdown). The average horse size has a 33″ crown to fit horses 15 hands and under and the large horse comes with a 36″ crown and is designed to fit horses over 15 hands. The short cheek pieces on this headstall keep the buckles away from the horse’s eyes.
• Bit: 5/16″ Ring Snaffle #17 with the #9 3/8″ mouthpiece. The mouthpiece on this snaffle has a slight bow which tends to be easier on the mouth while at the same time giving a stronger signal than a flat mouthpiece. The mouthpiece is inlaid with copper to promote moistness in the mouth. Close-up of the bit shown at left.
• Curb: Leather Curb Strap with Rawhide #CU40. This curb is made of 1/2 inch hand-edged latigo and is complimented with handbraided rawhide balls and loops. This curb is AQHA and NRCHA legal on snaffles.
• Reins: XX Harness Leather Split Reins #ASR3. These reins are 7 to 7 1/2 feet long and 5/8 inch wide. They are just right for riding colts, are heavy enough to show in and have great feel. Close-up of the reins at left.
This is the bridle the pros start and show their colts in; very functional, exceptional handmade quality, and built to last. Also shown on the horse is the Shaped Breast Collar #BC2 which may be purchased separately.
Get this beautiful professional quality handmade bridle ready to ride!
One Buckle Slide Ear Headstall with Rawhide #HS54
Description: The One Buckle Slide Ear Headstall with Braided Rawhide is made of 5/8 inch single ply harness leather with hand-braided rawhide on the cheek pieces and a beautiful rawhide accent on the ear piece. The stainless steel buckle is beveled and has a braided rawhide keeper. The leather beneath the buckle is handsewn together to keep the buckle from slipping. This headstall looks great with the #BC5 Straight Breast Collar with Rawhide or the #BC7 Full Rawhide Braided Breast Collar and with the #CCR1 Rawhide Romel Reins.
Available with your choice of slot concho, concho, or tie string bit ends (see dropdown).
Shown with slot conchos.
Bridle with Buster Welch Bit & XX Reins #HT7
The #HT7 Bridle w/Buster Welch Bit & XX Reins is made up of the:
Headstall: This beautiful HS53 Two Buckle Slide Ear Headstall with Rawhide is made of 5/8 inch single ply harness leather with exquisite hand-braided rawhide on the cheek pieces and a beautiful rawhide accent on the ear piece. The buckles are beveled stainless steel handstitched to stay in place and with hand braided rawhide loops. This is a gorgeous headstall in the show ring and also very durable for everyday use. It comes with slot conchos, shown.
Bit: #B5 Steel Buster Welch Shank Bit with Silver. This solid shank bit has 8 1/4 inch shanks and a 5 1/8 inch wide mouthpiece. This is a favorite among horsemen, especially cutters. If you aren’t getting quite enough feel or response from your aluminum bit this may be a perfect replacement. The port on this 6F mouthpiece has a slight rise to give some tongue relief. The mouthpiece is flat allowing even contact across the tongue, not just at the area of the bars as in a mouthpiece with bend. This bit is made from high strength 4130 steel and is beautifully overlaid with hand engraved nickel silver.
Curb: #CU20 Nylon Stainless Steel Dog Chain Curb. The chain in this curb is stainless steel with 1/8 inch nylon cord ties. This curb gives a stronger signal than either a leather curb or a flat 1/2 inch chain curb.
Reins: #ASR3 Dennis Moreland XX Harness Leather Split Reins. These are the biggest selling rein I make. They’re hand cut from heavy harness leather and are 7 to 7 1/2 feet long and 5/8 inch wide and are short enough to ride little cutters with and heavy enough to show in. Heavy harness leather bridle reins are very special to me. Every effort is made to give you the best rein you have ever had. From working with the tannery to get only the finest dense, tight fibered leather available, to cutting the reins in pairs, edging, hand rubbing, oiling and hand rubbing again for a great feel before the reins are shipped to you. This tight fibered harness leather will last for years of hard use.
This bridle is perfect for the arena and will also hold up for years under the toughest outdoor conditions.
Sliding Gag Bit with Snaffle Mouthpiece #20
Description: You have a choice of 3 snaffle mouthpieces and 3 headstalls with this Sliding Gag Bit. The mouthpiece choices are a 3/8 inch common snaffle, a 5/8 inch common snaffle or a dog bone snaffle. See the photos at left, descriptions below, and dropdown to order. You also have your choice of 3 headstalls. The first is a stainless steel twisted wire headstall which is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are also available. See the photo at left and the dropdown to order.
The custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on this cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
#9: The Two Piece (common) Snaffle mouthpiece #9 is 3/8” in diameter. It works to give you a quicker and more consistent response when you ask your horse to give its head.
#52: The mouthpiece on the #52 common snaffle is 5/8” in diameter. The large diameter will help your horse relax. If your horse is anxious or afraid of the bit this mouthpiece may work very well. This bit gives a slower signal than a mouthpiece that’s smaller in diameter. This slower signal will help reduce anxious behavior.
#16: The 3/8” Dog Bone Snaffle. This snaffle really helps a horse relax because it is such a gentle mouthpiece. The extra link in the middle of the bit spreads the pressure from the rein signal more evenly across the mouth than a common 2 piece snaffle. The copper rings promote salivation and give the horse something to roll with his tongue to help him relax.
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Choose any Dennis Moreland split reins or roping reins for your sliding gag. The Sliding Gag is sold without reins. To select your reins visit the rein category and add them to your order.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
Bridle with Spanish Bit & Romal Reins #HT91
The #HT91 Bridle w/Spanish Bit & Romal Reins is made up of the:
Headstall: #HS51 Cowboy Headstall with Braided Rawhide. This headstall is made of 5/8 inch harness leather. The crown and sliding ear piece are covered with exquisite hand braided rawhide. The sliding ear piece is designed to fit both small and large horses. The beveled buckle is stainless steel. The leather beneath the buckle is handsewn together to keep the buckle from slipping during adjustments.
Bit: This bridle comes with your choice of the #B91 Spanish Bit w/ Spade or the #B92 Spanish Bit w/Frog which has 8 1/4 inch shanks covered with hand engraved inlaid silver. The frog mouthpiece has a 2 inch port with a copper cricket and is 5 inches wide. The cricket rolls beautifully and sounds soothing to the horse as well as helping to keep the mouth moist. The shank and the port on this bit is angled making this a good bit to advance your younger horse to from the hackamore or curb.
Curb: #CU21 Double Buckle Leather Curb. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. It is both AQHA legal and NRCHA legal on a bridle.
Romal Reins: #CCR1 Rawhide Romal Reins. These are made of finely braided rawhide crafted by an expert braider with 45 buttons and 9 barrel knots. Reins are braided on your choice of 2 core widths: 3/16 inch for smaller hands and 1/4 inch for bigger hands (see dropdown). The romal and reins are connected with an 1/2 inch latigo strap with rawhide balls and loops and the reins have stainless steel swivel snaps. The romal and reins are each 48 inches long and connectors are 12 inches for a total of 108 inches. The popper is hand stamped double and stitched skirting leather. See close up picture at left.
This is an absolutely beautiful, top quality outfit for your bridle horse. It is NRCHA legal for all bridle horse classes.