Sliding Gag with Link Mouthpiece #20-50
From $173.99
Description: A link mouthpiece gives this sliding gag a stronger signal than the common snaffles or the twisted wire mouthpiece and is easily accepted by horses. This Sliding Gag w/Link Mouthpiece #20-50 is made with your choice of a stainless steel twisted wire crown or, for the more sensitive horse, a 3/4 inch harness leather slide ear crown piece or a 3/4 inch brow band headstall (see photo).
The center bar on this bit’s cheeks limits the movement of the sliding mouthpiece to provide a quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle on each side. The buckle is attached to adjustable single ply 3/4 inch harness leather cheeks (see diagram at left). The link mouthpiece is a life-saver if your horse is resistant to the pull and does not want to follow his nose through the turn. This mouthpiece gives the strongest signals of all the gag bit choices.
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown is designed for horses requiring less pressure on the poll than the stainless steel twisted wire crown produces. The leather crown works well with this link mouthpiece on horses that are sensitive to pressure on the poll but very resistant to giving to the bit. There is instant relief when the pull is discontinued.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
Related products
-
Curb Strap with Dog Chain #CU11
$28.50Description: The straps on this Curb Strap with Dog Chain #CU11 are made of two 1/2 inch pieces of harness leather that are hand-edged, hand-rubbed and waxed. A 4 inch piece of chain is attached between the straps. The beveled buckles, dog chain and wire loops are made of stainless steel.
How it works: This curb delivers a strong signal and is the strongest of all the chain curbs I make.
To learn more about curbs visit my Tack Talk article “Curb Your Enthusiasm“.
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
From $173.99Description: This Dennis Moreland Tack Sliding Gag Bit is built with a twisted wire mouthpiece. You have a choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall (see photo). The center bar on the bit cheeks limits the movement of the sliding mouthpiece to provide a quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle or dog bone snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off.
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
-
Spanish Bit with Frog Mouthpiece #B92
$734.99Description: This beautiful handmade Spanish bit has 8 1/4 inch loose jaw shanks covered with hand engraved inlaid silver. The frog mouthpiece is 5 inches wide and has a 2 inch high port with a copper cricket. The cricket rolls beautifully and sounds soothing to the horse as well as helping to keep the mouth moist.
How it works: Both the shanks and the port are angled making the action in this bit slower than in a straighter shanked Spanish bit with or without a straighter port. The horse will also be able to hold his head more naturally in this laid over port than in a straight port making this a good bit for the two rein stage of training the bridle horse.
Also shown on the horse is the #HS51 Cowboy Headstall with Rawhide, the #CU21 Double Buckle Leather Curb, the #CCR1 Rawhide Romel Reins and the #BC7 Full Rawhide Breast Collar.
-
Bled Double Buckle Curb Strap #CU30
$39.00Description: The Bled Double Buckle Curb Strap #CU30 is made of 1/2 inch latigo leather that has been bled (braided) in the center. The bled leather has more texture than a flat leather strap. The texture increases the feel of the curb. The buckles and wire loop keepers are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb has a lot of feel on a young horse without the advanced signal of a chain. It makes a very nice transition curb when you need just a bit more signal than a leather strap but don’t need the strong signal of a chain curb strap. This curb is not legal on a shanked bit in AQHA classes. It does make a great training curb.
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
Steel Long S Shank Bit #B3
From $392.00Description: This Steel Long S Shank Bit #B3 is made from high strength 4130 steel. The shanks are 7 3/4 inches in length and overlaid with hand engraved nickel silver. This bit is available with your choice of 2 mouthpieces (see picture). Both mouthpieces are 5 1/8 inches wide, 7/16th inch in diameter with 1 inch ports and have copper strips inlaid to promote salivation. The bit is NRCHA legal with the #4F roller mouthpiece and comes with the #BH41 Latigo Bit Hobble when the roller mouthpiece is ordered.
How it works: The length and slight angle of the shanks provides you with enough leverage for a quick response when the reins are pulled or released and will be a good step up if you need a quicker/stronger response than you are getting with a shorter shank bit.
Shown with mouthpiece 4F.
